​

Your cold spark machines have been set up and prepared for your event. Please follow the instructions below to ensure safe and proper operation.

​

🔌 1. Power On

• Ensure the machine is plugged directly into the wall or heavy-duty extension cord

• Flip the power switch on the back of the machine to ON

• The screen will light up

​

🔥 2. Preheat (VERY IMPORTANT)

• Once powered on, the machine will begin heating automatically

• Allow 10 -15 minutes to fully preheat before use

• The system must reach a minimum of 550°F, and both indicator lights must be yellow and display “READY” before use.

• Do NOT attempt to use before it is fully heated

​

🎇 3. Turning Sparks On

• Once fully preheated, use the remote or control button provided

• Direct the remote to one cold spark machine and press A

• Then direct the remote to the second machine and press A

• The machines will activate and sparks will shoot upward in a controlled stream

• For higher sparks, press B on the remote

​

⏱️ 4. How to Use During the Event

• Use in short bursts (5–10 seconds at a time) for best effect

• Do NOT run continuously for long periods

• Allow a few seconds between each use

• Press STOP on the remote to stop the machines

​

⚠️ 5. Safety Guidelines

• Keep all guests at least 6 feet away

• Do NOT touch the machine while in use

• Do NOT move or reposition the machine

• Keep away from water, drinks, and moisture

• Do NOT place anything over the machine

​

🚫 6. If Something Doesn’t Look Right

• If sparks appear weak or stop:

  • Wait 10–15 seconds and try again

• If machine stops working:

  • Turn OFF

  • Wait 1 minute

  • Turn back ON and allow to reheat

​

🛑 7. Turning Off

• When finished, switch the machine to OFF

• Allow machine to cool before touching or moving

​

📞 Need Help?

If you have any questions or issues during your event, please contact:

In the Picture Moments
📞346.258.PICS(7427)

​

Enjoy your event and the experience ✨

​

Important Notice

Please follow all instructions and safety guidelines when operating this equipment. The client is responsible for the care and supervision of all equipment during use and may be held liable for any damage, loss, or required repairs resulting from misuse, guest interference, or failure to follow instructions.